Zerone 5.25'' to 3.5''/ 2.5'' Bay Mounting Bracket Kit, 5.25" Bay SSD to 2.5" HDD/SSD & One 3.5" HDD/Device Front Bay with Mounting Screws

Easy to mount 6 2.5" disks in a small place.

3.5" drive fits only one way up, which put the SATA connectors at the opposite side to the CDROM player in the adjacent bay. The power cable wasn't long enough to reach both units. I had to drill four holes to allow mounting the 3.5" drive the other way up. Lost one star here.Lost another star for high price. It's molded plastic, barely strong enough for the job.On the plus side it did fit the Dell Optiplex 7010 without problems.I don't like having the Olmaster brand name on the tray. Blank would have been better.

The only con of this bay adapter is that I had to install the 3.5 hard drive upside down so that I was able to attach the sata power and data plugs to the hard drive and the SSD drive below the 3.5 inch hard drive. The sata power cable was not long enough that came with the computer power supply. If I mounted the 3.5 inch hard drive the normal way, then the power cables wouldn't reach both the hard drive and the 2.5 inch SSD drive.

What a piece of junk. I tried to modify it to get it to work, so I couldn't return it. Should have just sent it back. Problems:1) you have to mount the disks upside-down. If you have right-angle SATA cables (required to fit in my case), you can't plug them in. I had to kludge up some additional holes to put screws in to mount the bracket right-side up.2) the 2.5" drives are mounted all the way forward in the tray, which means once the bracket is inserted into its slot, the SATA connectors on the small drives are inaccessible. (plus, again, right-angle connectors won't work at all).3) The front of the bracket is solid plastic, meaning there is ZERO ventilation. Maybe OK for SSDs, definitely not for spinning disks. I drilled a bunch of holes in the front to allow for ventilation so my 3.5" drive wouldn't overheat.4) The material is soft, thin, cheap plastic. It shakes, and makes a terrible racket when the 3.5" drive is working and seeking its heads aroundNot recommended at all.

After browsing at many adaptors, I chose this one. Reasons:- Able to add up to three devices with a single adaptor.- Easy to mount the devices to the adaptor, and the adaptor to the case.- Comes with different screws for mounting different devices.Why only four stars?- Pricey for a plastic adaptor.

Per the description:"Fits 6 x 2.5inch HDD / SSD or 2 x 2.5 inch HDD / SSD + 1 x 3.5; Supports 7mm - 15mm 2.5inch HDD "However, this is misleading.I was looking for a simple mounting bracket that would allow me to get 4 x 2.5" HDDs with a height of 15mm into one 5.25 bay. Although the product description says it supports them, you can only place two in the bottom. The slots in the top section will not support 2.5" drives with a height greater than 9.5mm.

I have no idea how to attach my 3.5 media card drive and there isn’t any way to access to the drive anyway. I should have listened to the reviews. I’ll have my husband cut the front and I hope it’ll at least line up in my Dell Optiplex 320. This is my second adapter that I have purchased and both are garbage!

Without doing any modifications to it, it doesn’t fit more than 2x 15mm 2.5” drives. I was able to cut the tabs off the top and put the screws through the opposite way and can fit 4x this way.

Great way to add more storage to an old case. Was a very tight fit for my optiplex 9020 though and the mounting holes didn't line up. But luckily the first problem fixed the second problem. That thing is not coming out on it's own.

Me gusto

Doesn't have 3.5 bay on the front but still usefull for installing SSD in older case.