Brand Factory Style SRT Spoiler Made for The Chrysler 300 2012-2023 Painted in The Factory Paint Code of Your Choice 563 PDN

Where do I start!?!? This company does some good work. The color (phantom black pearl) on my 300 is SPOT ON! Well done guys and gals for putting out a great product. I couldn’t be happier!! And lastly, and I repeat... DO NOT DRILL HOLES ON YOUR TRUNK! Rather, use the 3M double sided tape. But, I didn’t use the tape provided, which I think would have worked fine, but I wanted an act of god for that spoiler to come off. I went to Lowe’s and for around $8 bucks got a roll of 3M heavy duty 30lb test. Just make sure you clean the surface VERY GOOD and take your time measuring. DO NOT RUSH IT! Please see pictures.

Pay absolutely no attention to any negative reviews!! #1 did not have to drill holes or use any hardware!Use two-sided (3M,Scotch or Gorilla tape)...30lb strength!YouTube video will show EXACTLY how to do it!#2 My color is "Redline pearl" this color is absolutely,positively, perfect spot on match!!#3 you will NOT find a better price!#4 it was delivered 3 DAYS EARLY!My brother ( big time car guy) was in awe and kept saying " it came like that,painted?...for 99 bucks?"He really was impressed! Big time!BTW...if you have a V6 RWD(not AWD) this spoiler basically turns your 300s into a "HEMI"! The only difference between the V6 and V8 hemi is the spoiler.😁

The paint is a perfect match. The outside mounting holes are about 3 inches too close to center. If they spaced those out, installation would be a breeze. I pretty much destroyed the inner bracing of the trunk lid to mount the dumb thing. I would not do it again, I think. If I had to mount one again I would buy additional two sided tape and not do the holes and bolts. I ended up with one visible dent in my deck lid. I’m a little upset about it.

The directions are quite generic and not model specific. I decided to use the bolts and some double sided tape for the install on my wife's 2017 Chrysler 300 C. Like most newer cars, the trunk lid has a easily removed hard cloth type liner.Once that liner is removed however, extra metal ribbing is found. That extra ribbing makes this task difficult. Where the bolt holes are at on the spoiler make it impossible to line up the bolts from below.I had to drill large holes in the ribbing and carefully line up bolts on the tip of a screwdriver to get the bolts into the spoiler pre-drilled holes.Couple of hints, keep a couple sets of hands close by to help...just impossible otherwise at least on this make/model of car. Also, keep small-headed telescoping magnet handy. I dropped the bolts a few times inside the innards of the trunk lid. Having the magnet made it easy to fish the out. You can also magnetize the bolt and screwdriver tip....makes it a little more secure when pushing the bolt through a couple of holes.

Product shipped quickly and arrived sooner than expected date range. Matches paint perfect, there was a small little scratch on one spot and they painted over a sticker or two on the bottom of it. I used gorilla glue mounting tape. I used 2 rolls of 1 inch by 60" and trust me, this thing ain't coming off, even if I want it off. At this point it's basically permanent. Looks great on my car. Great value for the money, would recommend

my color is what they call ceramic grey code PDN this thing looks like it was factory installed its awesome now I didn't use the tape I used the 3 bolts that are supplied and as long as you cut the 3 line up plastic things they give you to line up where to drill like the picture I show here line it up on trunk tape down plastic jigs gently lift off spoiler (make sure they don't move lightly center punch a small dent remove jigs and drill SMALL hole) ….Then start going up in size to 5/16 hole .After you have removed in trunk felt the center hole is easy to get to the 2 end holes are behind structure posts BUT you can see the holes you drilled in the lid just make a mark with a marker where you would need to be able to axis bolts and drill another SMALL hole then use a step drill bit to drill through beam big enough to get screw driver through or bigger if you want to use a socket P.S. use blue lock tight on boltsI had this hole thing done in less then an hour and this is also the first review I have ever done that how impressed I am with this product Peter...….

This product uses plastic straps inserted into the bottom screw holes. You are supposed to place the spoiler with straps onto your trunk, then tape down the straps and "carefully" pull off the spoiler. Really, really stupid design. Almost impossible to get the straps loose. Especially since you have to do all of them in concert so as not to tilt or shift the others. Worse, since the strap is like 1/8" thick, as you spoiler wraps around the back of your trunk edge, by design the holes will be misaligned equal to the thickness of the straps. You'd think a U.S. company would have more smarts than this... unless it is a Chinese import, just distributed in the U.S. by this seller.

Pulled the trigger on this one, first, simply because of the price! Couldn't be beat anywhere else! Secondly, the paint match option and I'm so glad I did! Perfect match and so much added style! I have a 2016 300c non HEMI : ( Anywho, still looks great and so many compliments already! Adhesive tape that comes with it could be better (wider), but just grab and wider outdoor grade roll from Lowes/HD (Gorilla!) and you're golden! Make sure to dry fit and mark edges with masking tape to use as your guide. Peel, stick in place, and press!!! Simple so long as you take your time!

When I placed my order I was informed that delivery would take 10-20 day which was alright by me. Was i surprised when my item arrived in only 3 days! The fit and finish of the spoiler is top notch. I would highly recommend anyone to purchase from Spoiler and Wing King.

Arrived 2 weeks early.. met all of my expectations just need to install now

best purchase ever matched perfect and fit. if you want this item get it you won't regret it. received it in 3 days fast shipping.

Put this spoiler on my 2016 300 limited with my own 3m tape. Perfect fit and paint is flawless. I can’t believe the price. Amazing product!!

Perfect color match, no scratches or dents, it was easy for me to install and looks great on my car.