Pyle Desktop Microphone Stand - Universal Tabletop Mic Holder w/ Flexible 8.2'' Inch Gooseneck Mount and Solid U Shape Base - Perfect for Table Desk or Counter - PMKS8

This is a VERY sturdy mic stand. Some are complaining about the height not being as claimed, but if I take a tape measure and measure from the bottom of the base to the top of THEIR MIC ATTACHMENT as it is arranged to be perpendicular to the gooseneck (like their photo, but with the gooseneck straight) ... I measure 12 inches. I think that whether or not you like it is a matter of whether it fits your individual needs/requirements. The base is quite heavy. The gooseneck is very firm and definitely takes two hands to maneuver - but this is the same characteristic that will keep it from bending to the weight of a microphone in a way that you might not want. I count it a good thing. The (very sturdy) gooseneck is about 7.5 inches long from end to end, not counting the threaded ends. The base itself is a painted and highly textured die cast metal. For whatever reason, I immediately thought about rust when I received it (perhaps because it reminded me of wrought iron) and I looked down into the base and yes, the threads in the base were already rusting. I took some WD-40 and a paper towel and cleaned that out first (it was pretty dirty, it took a few passes), then sprayed the threads of the gooseneck before attaching it to the base. I had no problems attaching the gooseneck to the base, and no problems with attaching another microphone holder that I have to the top end. The threads are the standard microphone threading of 5/8 inch, 27 threads per inch. And yes, because there is no jam/lock nut included, your mic clip may end up in a wonky position or "unthread" itself if the positioning is not right. I don't have any spare lock nuts but intend to purchase a couple of them with another order from another site that sells them. Then I figure this little stand will be pretty much perfect for my needs, and at a very low price for the quality.

This is part of my first attempt to get a decent mic setup for home use. A few months ago I picked up Scarlett Solo for messing around with electric guitar amp models and recording in Linux. Recently I got a cheap dynamic microphone (an SM58 clone) to try with the Solo. It worked well, so then the last part of the agenda was a mic holder. I wanted something inexpensive, sturdy, and adjustable to place on a desk or on the floor next to an amp. The Pyle stand fits the bill nicely. The metal base has a nice weight to it, and the adjustable neck feels sturdy. I also like this form-factor more than some of the other products that use a desk-mount or a little tripod. A mic clip also comes with the stand, and it fits the mic perfectly. The mic clip was missing when I first received my order, so I wrote to Pyle customer support. They were very easy to deal with and shipped the piece to me to complete the stand.

Seems solid. Well built and road worthy, though I just bought it for my home studio desk. Came a little scuffed up, hence 4 stars.

I like to record guitar and vocals in front of my computer - there's an image. However, it's always been difficult sitting close enough to reach the mouse, while holding a guitar (which is plugged directly into a mixing board) and have a mic stand in front of me. Too many items, not enough space. So when I saw this item, I thought I'd give it a try. It's a very good mic stand. Solid, heavy, nice materials. The neck takes some effort to shape into place (which is a great thing) because once in place - it stays there! My mic is skinnier than some, so at level or angled upwards it has no issues staying in place, but when angled down at all it slides...not an issue with the item - just my mic - and it's an easy fix with some electrical tape. I would highly recommend this item for both its quality and because it is incredibly practical for anyone playing/recording in front of their computer.

In setting up an audio booth, we needed a desktop microphone stand and this one is perfect. The base is very heavy and stable, and it supports a simple microphone perfectly. The black base has a rough cast finish, that looks fine and the short flexible gooseneck works well. The microphone clip works well also. The only minor downside is that when screwing the gooseneck and clip together, there are no lock nuts provided. This means when they are fully tightened, the microphone clip may not be oriented properly, but it's something we can work with.

The stand is fine but it was missing the lock ring for the flex mount so I had to take a ring off of a old stand I had so I could lock it down.

I purchased this product and was very impressed with the quality and the value. I bought it to use at our church so that the person speaking could sit on a table. It works very nicely for this purpose. It has a heavy all metal base so it will not tip over and the goose neck allows the microphone to be adjusted to any desired height. I strongly recommend this microphone stand it has surpassed my expectations. Buy it, you will be glad you did!

This isn''t the sexiest mic stand in the world but it's really functional and sturdy AF. Some people have complained about rust and defects in the iron base. Yeah, mine has a few very small defects as well, but HEY, it's $8, is super functional, and I'm not even mad about about it so not even gonna knock off a star. I appreciate whomever worked their butt off so I could have this mic stand for $8.

Poco puedo decir de este producto porque en cuanto lo abrí y lo probé, vi que el soporte no admitía el micrófono que quería utilizar (SpeechMike de Phillips) así que lo devolví. Aún así me pareció un producto de calidad, robusto, bastante pesado y estable. Habría que verlo con un micrófono puesto para ver si es tan estable con peso, pero probablemente aguantara bien. Eso sí, me dio la impresión de que en vivo era más corto de lo que parecía en las imágenes; probablemente aunque el micrófono entrase en el soporte no se si mu hubiera servido por la longitud del "brazo cuello de cisne".

Accessorio indispensabile per commenti e confronti d’idee disimpegna la gestualità

Great solid stand, solid metal so nice and heavy thus stable. Good quality, and would recommend as value for money. I have a nice Mic which is a bit heavy and it works perfect.

I wanted a stand just to prop up my mic while I play guitar. I just wanted something cheap so I went for this one. I was pleasantly surprised to find that it was a nice, heavy stand that won't get knocked around. I didn't read the description but the picture led me to believe the base was made of plastic but it's actually made of cast iron which is much heavier and stronger. The neck is quite flexible but stiff so that it won't lose its position easy. There are also rubber bottoms on the stand for friction and so it won't damage your table or desk. The neck might be a little short for some people but other than that, this thing is actually better than I expected.

un support stable pour bureau ou table pied en fonte , ne perd pas l'équilibre avec un micro, (accompagne mon setup parfaitement)