Casaverde 4.5Inch Diamond Tile Blade for Cutting Porcelain Tiles Marbles

These diamond cutting blades are excellent quality and perform incredibly well. They cut smoothly, quickly, and with great precision on tile, ceramic, and other hard materials. The blades feel durable and long-lasting, even after multiple uses. I’m also impressed with how clean the cuts are, which makes any project look much more professional. Great value for the price and a reliable choice for both home improvement and professional work. Highly recommended!

Pleasantly surprised by these blades. My snap cutter would not cut the thick 24x48 porcelain im working with. These blades are working great. Fairly clean edges that after polishing look great, and im dry cutting mostly. Use a little water and you get even better cuts. Im only using water on my miters. Great blade for the price. Even if I bought a blade per job I would still be very satisfied with the quality of cuts im getting.

I pick up a used blade that some workmen set aside because of a slightly crack on the edge 5 years ago. And I realized that whenever I get to do some tiling job, I always bought 1 or 2 new blades and every job I did I have to turn to this cracked blade that completes the job 100% better than every new blad I started with. And this year I use it spontaneously to finish 5 bathrooms. Whenever I need a very smooth cut or polished edges, I used it. Now it is much smaller than it was. I have being searching for this workman to find out how to get this blade. I found the boss and he gave me this link. I would buy a tun of this blade if I had to. But I just purchased a 5 pack.👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾 Haven't got them yet 👀

I bought these while cutting tiles for my bathroom remodel. I used it to cut out around the wall outlets, swtiches , water supply, and drain etc. These blades performed very well and didnt leave lots of chipping along the cuts. I bought a pack of five thinking they would wear out quickly, but I still have three left, so they are more durrable than I had expected. If you are looking for an inexpensive small diameter blade I reccomend them.

Very good cuts of porcelain tile with minimal chipping. The arbor in my saw is small and required the insert that came with the blade. It was a bit of a challenge getting the insert in. I started tapping it in with a wood block, but the insert is two rings (allowing for three different sizes I guess) and the inner ring got knocked askew. I eventually resorted to hammer, got the outer ring in place and flipped it over to tap the inner ring back. This needs to be done with care since the insert is brass and damages easily.

Blade won't flex, so the cuts stayed straight. very good quality. Did all the kitchen backdrop counter tile. will be doing the bathroom shower/tub soon.

The smoothest its on porcelain, grant and ceramic I’ve encountered and a a very good price compared to the better known brands

I bought a pack of two of these. If you free hand cut tiles or milter this is the one to get. Cuts (without error on my part) are pretty damn good. Not prefect. There are the tiniest of chips but at the price its way above the stuff I have been using for years. And as the blade is so thin you you can cut nice 2mm lines out of a full tile with some patience for those bath tub service hatches. The one disk I have been using is still good after a 8mm porcelain big bathroom job with lots of cuts.

I bought this blade when in a pinch. I was cutting ultra compact surfaces (dekton etc). I dropped my blade on the ground and bent it. Ordered this blade and to my surprise, it cuts better than my very expensive blade that’s specific to ultra compact material!! I bought 10 more to keep in stock since I use these a lot! Great product!

Had to drill arbor out to 1". Works well

El corte es lento pero queda muy limpio sin descosían el porcelanato

Buen producto .

It works great for porcelain tiles