AURA Pro Interior

These OPT7 Aura Pro LED lights completely transformed my car’s interior! 🚗💡 I couldn’t believe the difference it made the first time I turned them on — it’s like stepping into a custom show car every time I open the door. The colors are rich, vibrant, and so easy to customize through the app 📱 or the included remote. Whether I’m setting the mood for a night cruise 🌙 or syncing them to my favorite music 🎶 with the Sound Active mode, the vibes are unmatched. Installation was super simple. The adhesive is strong and held the strips securely in place, and everything plugged right in with the 12V car charger — no splicing or crazy wiring needed. 🔧👌 I especially love the double LED rows for extra brightness — they light up my footwells and under seats perfectly, and the multicolor options let me match them to the interior or my mood 💜💛💙. This set is also super durable and high quality. I’ve used other interior lights before that faded or had dead zones after a few weeks, but these have held up perfectly with no dim spots or issues. 💯🔥 Honestly, these are a game changer for anyone who wants to upgrade their ride’s interior with color and personality. The app is smooth, the remote is handy, and the entire setup feels premium from start to finish. 🌈🚘

Honestly, expected better. The lights are great. Wiring and kit is good. Could only get one to stick, but its likely the surface composition in my car. They felt sticky enough.. should include a USB adaptor, not just a 12 volt plug or wiring kit. A USB would be super handy. I was still able to get them all installed. The rear seats, I just laid down on the carpet under the seat. On my front passenger side, just kinda tucked it up in a crack. Only light that stuck was under my driver's dashboard. Everything else didnt. Probably just a bmw problem, not the glue. I even rubbed everythjng with 70% isopropyl alcohol too. Im still giving 5 stars because it seems like the company manufactures things well and offered a reasonable price. Another kit i bought for my truck, was about the same price, and I can barely get the remote and stuff to work. These seem well built - minus the glue. I might be able to hack it with a few drops of superglue or something.

Generally speaking, it's a nice light set, as long as you don't try to install it in a way it wasn't intended. My issue is with attempting to hard-wire it to my dome light circuit so that the lights come on automatically when the doors are opened and then eventually fade out after the doors are closed. I wired it this way and then discovered that the lights will come on GREEN EVERY TIME, for a second or two before switching to you last selected color. Think of the "controller" as a little computer that needs to "boot up" when first powered on. When you first give power to the controller, it always starts with green, then the controller boots up (or loads all settings) and restores your last color. Then shows your preferred color. There's no way around this: it's the way the controller is designed. Other difficulties installing the lights: [1] I can see now that I would probably prefer a sturdy LED bar that can be zip-tied to the car easily over a flexible LED strip that needs to be taped. There won't often be nice surfaces to tape the LED strip where you want. You'll end up using zip ties anyway, which would work better if the LED strip was sturdy rather than flexible. [2] The controller only has two outputs for four LED strips. You need to wire two of the LED strips in serial (okay) but that creates an awkward installation where you run a wire to the far side of the LED and then the LED strip comes back toward where the wire came from. It seems like going out of the way and using too much wire. [3] I tested all four of my LED strips before installing and they all worked, but then one stopped working after I installed it. I'm certain it's a wiring connection issue. I'll call the company to see if they can send a replacement. [4] There's no power cord provided that will be long enough for a hard-wired installation. I found an old power supply with the same size barrel connector and cut the wire from that. Nice features: The remote control works really well, even when the controller is hidden. I tried the app and it seems to work well, and provides more features than the remote control. The "auto" and "music" modes seem to work well (even without the app). The LEDs are nice and bright, and the brightness is adjustable. I think everything would work out well for you *IF* [a] you plan to just power it with the provided cigarette lighter plug, or [b] you plan to hard-wire it with constant, "always on" power.

These lights are awesome, they have lots of colors, the play to the beat of music, they do all kinds of blinking and movements in different colors and movement patterns and they are bright, do yourself a favor and order them today. I didn't use the cigarette lighter plug so I ordered the power cord that plugs into the fuse box panel with a fuse holder wire tap. It was easy to install, my vehicle is a 2024 KIA Sportage Xline.

5 Star for this product...The light strips are well made, in closed with a clear flexible rubber coating and looks like they'll hold up to a lot of different environments. The adhesive tape strip on the back side of the lights is strong and comes with one packaged adhesive booster whip alone with a couple little velcro strips and six plastic wire mounting clips with screws. These lights are bright and brilliant, the music Sync works great and picks up the sound signal well. This light kit comes with everything you need for a small car, truck or SUV install with lots of connection and extensions. I did need to purchase 6 additional "OPT7 extra light kits that just come with TWO 12" light strips and extensions to light up my 2019 Mercedes Sprinter interior. This is when I discovered that you can not simply connect the extra light strips directly in a continuous light line. **IMPORTANT to know** With these light strips they are not like other strips where you can add extra strips simply connecting directly into the other making a train line of lights. These require you to use their "Y" connector, the ones provide are 3" long so you will end up with a 3" long gap between strips. Other strips I have used simply plug directly into the same strip giving you a continuous line of lights. So something to keep in mind if purchasing this product. I was lucky when I bought these, my intentional reason for buying this product was to light up my 2019 Mercedes Sprinter which would not have worked because of the single strip connecting to the another single strip only with their 3"long "Y" connector, I wanted an unbroken light line. My luck, I just so happen to need lights in my 2019 Cadillac Escalade ESV, so no need to send these back. The APP works well but not great, you"ll need to work with it and have some patience. Once you figure it out it seems less troubling. I would recommend this Light Kit to those of you that only what lights under your two front seats, two rear seats and possibly under your dash in which you will need to purchase OPT7 extra light kit with TWO 12" light strips with plenty of extension wire. I would purchase this product again and from the same seller.

2013 VW CC install Read the instructions. Ensure you have ALL the parts. Plan your wiring. Place lights in area you plan to install and plug in to cigarette adapter to test lighting before install. Depending on vehicle and install you choose, plan on an hour or so to install. So, I didn't read all instructions and didn't realize what I thought was an antenna is actually the auxiliary wiring for door assist. This required having to run the wire a second time. Best if you're hard wiring to ensure your path and do it only once. Most frustrating thing was the wiring path in my Volkswagen coupled with 96 degree heat outside. Run your wires and depending on your car, run the auxiliary line but leave it unplugged. Unless you absolutely know your car and wiring, this is a 20 dollar "install" fee at most mechanics. Get it all set up and installed and have the pro hook the door assist up. Why? Well, depending on vehicle and how your lights turn on depends on best option to install. Example, if your interior lights fade on and off, it's likely the strips will blink when you open the door if just connected to door trigger. I had 1 strip where about a quarter didn't stick properly. Make sure you clean the area thoroughly before attaching. Use the provided pad, "adhesive booster" to wipe down the cleaned area, wait 60 seconds and then install. If you lose, don't have or the pad dries out, use rubbing alcohol and wait the 60 seconds before installing. I used a pin drop of super glue for the one piece. Bright and fun to use. However, the sound of my car on racing tires triggers the lights during the sound sync mode. You can adjust the sensitivity, but it made me realize just how loud my interior sounds while driving without music and air going. The lights appear to be extremely close to syncing with sound. Lights are a great accent to the interior and fun to play with. Worth the time and money IMHO Adhesion 4.5 out of 5, only because the one didn't stick well. That could be, I didn't clean well enough or the adhesive. Brightness 4.75 of 5, could be a bit brighter. However, installation location impacts this a bit. Plus you don't want them to distract or garner unwanted attention.

04/17/2020 I am using this for almost 4 months. Never got the door assist working. Today found out that the door assist is working only if the car runs and the app is on!!!! Why? I want the white light to be on when I open the doors. How can I run a car before opening the doors? Found on FAQ: so disappointed... -------- Question: "Where should the door assist be connected to? Answer: You'll just need to find the power wire for something that turns on when your door opens and splice it into that. This could be a dome light, factory installed foot well lights, door chime or even be the wire that actually powers or signals the dash light for the open door, the idea is that when power is sent through that wire, it acts as a switch for the control unit that tells it to turn white, so you just split e into that wire and piggy back off it's power. Question: "I have the Aura Pro and am trying to wire in the door assist, but the door assist only seems to be working when the app is already turned on (the lights will just change to the preset door assist color), but if the kit is switched off in the app, then the door assist will not come on when the door is opened. Is this the way it’s supposed to be or is there something wrong?" Answer: In summary, the DOOR ASSIST function will only work when the vehicle is on and when the app is turned on. Therefore, should you turn on or off the Aura Pro app, the same action will as followed. If this is something you are not looking for - we recommend switching to a Aura V1 Control Box which will allow the door assist function to work with a control of the remote rather than an app control. Depending on which Aura LED Kit you have, you will need a specific control box for a swap of the unit. You will also need to purchase the Aura V1 hand held remote for the Aura V1 Control Box to work. WILL update to 5 star if I am wrong or if it is working on a non running car. ----- 12/30/2019 This is My second interior car lighting system and the previous one was with a remote control not app controlled. I searched a lot and decided to go with OPT7 Pro. There were some comments regarding the weak responsiveness of the app control but wanted to use my phone instead of having a remote in the car. Opening the box was really exiting. Two boxes are coming out of the main box. Everything look really high quality and very solid. The unit is exactly as described. The fuse taps look high quality and you have 3 options (I am using the low profile for my Subaru BRZ) and the fuses are already at their place. Everything is included based on your quick installation (cigarette lighter) or hardwire installation. You can easily you the adhesive behind the leds or there are some adapters that you can screw and attach your leds. The control module has 2 outs where you attach the Y cable and get 4 cables to hook the 4 led bars. Straight forward. There are also extension cables which is really enough to hook it up in the regular size car or SUV. I am not sure why people do not like the Bluetooth app control! It’s amazing! At least my test resulted great. Please check the video. As I mentioned Before the installation I quickly hooked it up at home to see if works without any issues. You have several modes: 1) solid- where you can change color and brightness. It’s very sensitive. Even the bass sound is a little far it’s still very responsive. 2) strobe mode - you can change color, brightness and speed. Amazing! 3) Pulse- you can change color and speed 4 ) cycle - brightness color and speed are options to play with and the best, 5)sound sync- despite you can only change sensitivity it’s the best mode. It’s showing multicolor with a general with background but amazing. Did not expect that it will be that responsive. So far from what I have searched this unit is great. You can also turn the whole system off from the app. Didn’t have the chance to test the door welcome light but it’s straight forward. You can select a color for the welcome light and save it. For more information and installation manuals you can check the links provided in the little brochures that is in the box. I will definitely update my review with some pictures of the box owning and items. Will also update once everything is hooked up in the car. So exited to have it and listen some music with sound sync! Overall I am so happy with this purchase and hope that the smile on my face remains after my hardwire installation.

Overall it is a very good product. It shines bright is pretty easy to install and is very high quality. I had an issue with one stand when I first plugged it in, but got it replaced almost immediately and the new ones worked great. The app also has a lot of great modes on it, would recommend.