APA Replacement Head Light for 2000 2001 2002 2003 2004 Tundra (Double Cab Model ONLY) 2001 2002 2003 2004 Sequoia Pair Passenger Right and Driver Left Side

I bought similar lights from another seller and the connecting parts were broken. So I sent them back. These lights I got from this seller came in perfect. No broken parts. Took me less than 40 minutes to both of them in. Just getting the side signal/park lights out was a bit of a bitch, but other than that everything went smoothly. I read where one of the negative reviews said the lights didn't fit a 02 Sequoia, and I almost sent them back. Lesson here- don't always believe what you read in the reviews.

They were perfect fit and easy to install. Took about 45 minutes to 1 hour to install.

These fit my old 2002 Sequoia but I would pass on newer vehicles because of the cheap quality build. I had to repair one of them as a wire brace had come loose and the reflector had shifted, causing light to go out towards homes like a spotlight.Good thing I am handy and corrected the problem, others might have to return it if it has this problem.But they look good, hi and low beams work good, and since they include bulbs, it makes the total package a good deal.

Funcionan perfecto

Mounted perfectly with just a tad bit of a wobble after installation. Yes, made sure all screws were properly tightened & had to re-adjust lens aim as I installed Philips Diamond Vision in them which by the way, did not have any issues as well. This is actually how I learned how to adjust the aim & angle of the beam as previously mentioned having installed 5K specialty bulbs where on occasions, other motorists would flash their high beams @ me as the low beam being a tad bit too high and unadjusted to the light outputs of the Philips, and thats with the old lens being oxidized & hazy. Being new & all can really make them HID looking bulbs brighter that can blind oncoming traffic as the reflector housing seems super shiny just like the OEM. Retaining clips for the bulbs itself are a bit longer but nothing like a small trim of a plier cutter wont fix. Have to use the OEM rubber boots though enclosing the bulb connection as the ones came with it, even though has proper fitment, seems a little looser in comparison.Made my ride look young again with obvious clarity that certainly helped @ night time driving. Did not realize the capabilites of the Diamond Vision's till now with clear, new lens that are properly adjusted. No manuals came with the product but just youtube "04 Sequioa Head Light Installation" & its all the same with the 04 Tundra's Crew or Double Cab models. Took about an hour to install both & thats with going to Autozone to replace a hardware (rivet & screw that holds the corner light assembly) that snapped off that had gone brittle & the little time it took aiming the beam on a hot, sunny Vegas afternoon. Final verdict? Definitely 5 Stars!

I installed these on my 2004 Toyota Tundra (SR5 double cab). So far they have performed just as well, if not better than the original headlights. They definitely look cleaner and take miles off the overall appearance of the truck (the originals became discolored). Installation is very simple, though removing the corner lamps is a bit tedious at first. One recommendation I have for those about to replace their headlights is to check the adjustment screw of the new light housing before you finish installing it. I tried to circle the adjuster I am referring to in my one photo. Using this adjuster allows you to ensure proper fitment and alignment. In my case, the one headlight had a bit of a wobble and misalignment. I didn't notice this until after I finished securing it so I had to fight with the corner lamp again. Other than that, I have no complaints. These lights are a tremendous bargain compared to purchasing the replacements from a Toyota dealer.

These were purchased to replace the original headlight housings from our truck due to oxidation. We went the route of sanding and polishing the headlights twice and finished with ceramic coating but the yellowing always came back a few years later. Hoping these would solve the yellowing issue, they did. But it came with the consequence of blinding on coming traffic. The geometry of the reflective housing on these are not the same as OEM. When aiming the light agains the garage from 20 feet away, you get a decent cut off pattern. But once youre on the street, something else happens and the reflection from the housing scatters the light all over the street making it seem like you are high beaming everyone. This is with the housings aimed almost completely down! Do not recommend purchasing these unless you want to be high beamed back. Considering throwing our OEM lights back on and continuing to sand and coat every 2 years.

These new headlights took me approximately 30 minutes to replace.Perfect fit and I can’t believe how easy it was to install.I have been polishing my old ones for years.The cost was awesome.