Acrylic Figurine Display Case with Mirror for Doll, Bobblehead, Action Figure, or Collectible Toy Figure (A017-MB)

A solid and well made product. This case may cost a bit more than some of the others available here, but rest assured that while the price difference may be a bit of a leap, the difference in quality leaves a chasm between it and many of it's competitor's products.I've purchased dozens of cases over the years and have learned to expect a wide variety of quality both in material and craftsmanship. More recently, one case I purchased from another vendor on Amazon used a much thinner acrylic for the case proper and attached to it's base so loosely it left me wondering if the two pieces were ever meant to go together in the first place. Another case again used the thinner acrylic and had begun to separate at the edges where it had been joined and showed signs of crazing.The first time I held a case from Better Display Cases in my hands, from look to feel the quality was apparent. This case uses 1/4" acrylic as opposed to the more ubiquitous 1/8" you find out there. Not that there's anything inherently wrong with 1/8" acrylic glass. I would imagine it takes a higher level of care and competence to work with the thinner material. With that said, I've absolutely owned 1/4" acrylic cases with all the aforementioned problems of my recently purchased 1/8" cases. I am aware that Better Display Cases offers cases with the thinner 1/8" acrylic and while I think that it may be a more difficult material to work with, judging by the product I just received from them, I think I'd trust them to do it right. Thicker acrylic equates to a higher durability and at least for me, when wall mounting I feel more confidant that the item within will remain protected. Even if bumped into.The entirety of the case is crystal clear. No scratches or blemishes. Quality material aside, the craftsmanship stands out as well. The precision molding makes a world of difference. The assembled pieces are fitted tight and flush. The black back panel slides into place so snugly that even though it slides in from bottom to top (which is a function of it's capacity to be wall mounted) it won't fall out when the case is being held. I couldn't get it to budge even when shaken. The front and sides are all one seamless piece which enhances both the beauty of the case and the item within. The top and bottom are glued together I believe and done so with care leaving a near perfect seam. If I were to be hyper-critical or pushed to find something to be improved upon, I could point out that there is what looks like seepage or overflow at the seems of a couple corners probably as a result of gluing or solvent bonding. It's quite small and only visible upon extremely close inspection and has no realistic effect on the case's quality appearance.I could find no evidence of crazing whatsoever and this pleases me greatly. I'm sure most of you know already, but for those who don't acrylic is extremely prone to crazing or developing a series of fine cracks at it's cut edges (especially laser cut edges) as a result of improper bonding methods or for lack of heat treating the acrylic before joining sheets. Acrylic is so sensitive to crazing even the use of glass cleaner can produce this effect; which by the way is why you should only ever use soap and water to clean your display cases. Crazing seems to be a common issue. I've seen it many times and Better Display Cases has managed to avoid it entirely. I will definitely be purchasing from them again in the future and recommend them to anyone looking to protect and display their valued memorabilia.

These cases are wonderful and serve the purpose of displaying my doll very well! I feel confident that I can display my Barbie safely and she is protected. The case is kind of costly but well worth because they are made super well. I highly recommend this product!

The cases come well packed and protected. They come with four clear adhesive half circles you can adhere to the bottom of your case. So far I have ordered three of these cases for my Hot Toys Star Wars figures. They are by far the best cases I've been able to find. They're well made, sturdy and have come with no flaws. If you're looking for high quality at a reasonable price, I highly recommend purchasing these cases.

The case was perfect, came as advertised. Let me start off by saying that when the box came their was a large, deep gash in the side of it. Right from the start I was worried. But because of the sufficient and professional packaging materials around the case, their were absolutely no scratches what so ever. it was crystal clear. The case is well made and sturdy and the sliding back door works seamlessly. I got it for the clicker bust from 'The last of Us' and it looks great. Thanks 'Better display cases' for a job well done.

The case fit the doll perfectly. This is not a cheap, flimsy display case but a sturdy, well-made one. I particularly like the back of the case sliding up to put in the doll. The grooves allow easy access and it looks very professional.

Very high quality product. I absolutely love it and highly recommended.

The display case is very well made, but, I found it very difficult to attach and remove (if necessary), the side that closes up the case. I elected to not use it for the item that I purchased it for.

When was the last time you bought something on Amazon that had 5 star reviews from EVERY purchaser? I admit, it was the deciding factor and I am glad I got this. 5 years ago I went looking high and low for this exact product and couldn't find it. I have an antique doll that I wanted to protect but it seemed to be an inch bigger than any display case I could find. I finally ended up with a huge cloche type glass dome thing that took up far more space than was needed. THIS product? Perfect. It comes assembled, so you can have what ever you want to display ON display in seconds. I admit it took me a few to figure out how it opens, but after that. The doll is on display and looks great. (Some other reviewers mentioned a cleaning cloth? Mine did not come with one). The only thing that bummed me out slightly is it is made in China. Why is some person named Mo Johnson manufacturing their product in China? Is there no plexiglass company in the USofA that can do it? Pet peeve.