WOOSTAR Motorcycle Speed Controller 36V 800W Replacement for Electrical Scooter E Bike Bicycle Tricycle Brush

Working great in my scooter. Pushing a 24 volt 500 watt motor to 36 volts! Easy to hook up. Doesnt get too hot even pushing my 200lbs on my Rad2Go scooter! I took the wires for throttle out of connector and soldered the wires for a better connection than just a crimp! Don't want to lose connection on that!

Little hesitate but turns out to be a great 36v controller . Very good on speed and torque

I wired this to a modified MX350 Razor. I had to do some significant soldering to get it to be plug n play for the bike. I didn't want anything to be hard wired. Not a single plug fit so I had to change them all out. The throttle was the only tricky part since the original is 4 prong and this one was 3. Other than the significant alteration for it to work, it runs like a charm. Thanks.

Overvoltaged the razor 250w motor to 36v so I bought this controller for that purpose. Way better than the stock controller especially love the variable throttle. Does get a little warm but not too warm. Then I decided to upgrade the motor from 250watt to 350watt for more power and speed and controller takes that quite well too. Does get warmer than before but not hot at all. Please note that this 36v 800watt controller is NOT waterproof due to no silicone around it so make sure it's in a dry enclosure to prevent damage to the controller. Easy to wire up, Blue wire is positive to motor, yellow is negative to motor. Will buy again in future.

It worked for about 2 hours then it started smokeing and did not work any more so i have to order another one i checked everything on the scooter is fine and its only running on the original 36v battery which is good so bad box

This 36 Volt Controller works and works very well ! In fact I'm running it at 40 V and wanting to get more of them ! So far I have nothing but good things to say about this unit so I would tell friends to buy .

I used this to convert my kids 25cc powerslider from gas to electric 36v using two m18 batteries in series. This controller has held up so far.

This item needs instructions: Diagram on the body of the controller shows 6 plugs( in Chinese ) but the controller has 8 plugs coming out of it, only 2 are labeled. The on line picture shows only 6 plugs.

Auf dem throttel Sensor Kabel liegt plus und somit funktioniert nicht :0

Ne marche pas a éviter

As described

Works well, time will tell

I bought one wired up to 32v for test, (31 is cut off min) First one burned out instantly, and was complete waste of time and money. Then I thought maybe something I did was the problem and for the benefit of the doubt I bought a 2nd one. It came with a bent mounting bracket which looked like it held a greasy washer at one point and I suspect it was previously returned. The second one would not even power up, total brick. Wasted 3 days waiting for and trying pointlessly with these garbage items. DO NOT BUY! YOU WILL REGRET IT!