EMW5953260, 10 Count

So easy to use and it has been working great so far. I hope this is a long-term solution but so far, I am extremely pleased. I had two doors that had issues, one was the front door, and one was a bedroom door. It took about 2 minutes to fix both doors with these things. I wish I would have ordered them sooner.

I was skeptical on this product given is made of plastic. However, once I used this to fill the lose hinge holes, I realized that the product design and quality is top notch. It's very easy to use and adjusts to the depth/size of the hinge hole. Stays strong and works like a charm

From Jeff: So for use when repairing a residential front door hinge with standard sized Phillips wood screws (that are I believe a #8 size). The instructions for the package do warn you to "gently" screw in the molly. So that's good. You don't want to use too much force. I had an electric drill/screwdriver, flat blade screwdriver and a wedge to hold the door and a crowbar to move the bottom out. If you're doing it by yourself.I definitely needing to do a pilot hole first of around 5/16" drill. That would get the molly in to about the third thread on the fat end. Then I would simply smack the sticking out part with the screwdriver handle to snap it off. Worked well. Held the screws snugly but I would be wary of over tightening since they are after all plastic. If they were metal, ok then I would go tighter. But I certainly got them tight enough to hold well. They are designed to expand not unlike sheetrock plastic molly's with one slit in them.If you make the pilot hole small, be prepared that the phillips bit will strip the head. But it has a slot for a large flathead too to remove it again to use a bigger drill. The first bit I used was a little small.Biggest complaint, dudes, why only 10 units? Most doors need 12. Forcing to buy two packages. Reminds me of the hot dog packages with 6 hot dogs in them or the rolls with not enough rolls in them.. Hello.

Simple and perfect. Used it to fix a few door hinge screws that had worn loose. Took 45 seconds, door works as good as new.

Worked as advertised!!Used these anchors for a door that had a number of stripped screw holes from door over use.Inserted anchor and easily broke off to length as expected. Reinserted the screw and screwed in tight.Overall, appeared to work well and will see over time if it stands up to the test. Will update review in future.Thanks for helping me repair my door with an easy solution.

My daughter’s kitchen cabinet door had a hinge with 2 stripped out holes on the cabinet side. Woodfiller and toothpicks only worked a while (yes, there are teenagers in the house). This fix was quick and easy and, so far, is holding up perfectly!

I had to replace door jam screws with 3" long screws that were necked down by head of screw so this product did not work but when I switched to fully threaded screws product worked just fine. maybe Manufacturer could put that on instructions?

This works great. Super easy and just snap down. At first, it does not seem like much went in but it works great!