JFG RACING Dirt Bike Handguards,7/8" and 1 1/8" Handlebar Motorcycle Hand Guards Universal for Motorcycle Snowmobile Motocross Dirtbike Pit Bike Off Road ATV Enduro Scooter Accessories - White

These fit easily on my 2006 Yamaha TTR125LE and look nice. I only to had to bend the mounting ends a tiny bit in a vise to get things to line up, which would be necessary even with more expensive guards. I had to add a small piece of innertube around each of the bar end mounts to get them to fix securely in the handlebars. My bike has 7/8" steel OEM handlebars, but I think the bar ends would also work with thicker 7/8" aluminum bars with a smaller internal diameter. You might need different bar ends if the ID of your handlebars is larger than mine. Once installed the guards are very secure and should work well.They are clearly not of the same quality design and materials as name brand mounts, but they cost only about 1/3 as much or less and I think they are a good value for light use, the occasional fall, and keeping brush and branches from slapping your hands and control levers. I would say they are less than 1/2 the strength of the Moose Racing guards I have on two of my other bikes, and I would expect they will bend with a hard fall, though probably save your levers. They are soft enough you could probably bend them back easily a few times before they break, but if you need something to hold up to repeated impact or a little abuse, you might want go ahead and buy something more substantial. They are not thin or cheap looking, just the metal is much softer compared to the Moose guards.Update: Bought a second set and installed on a Hawk 250. Works great on that bike too, but I needed to to use a 3/4" spacer (I just used two large nuts) and a longer 8mm x 1.25 bolt to extend the handlebar mount for the left guard so it would clear the clutch cable. The bolt length needs to be more than 1 1/4 inch length below the head but it could be 2" or longer and still work.

this is the second set of these wrap around handguards that i have purchased for my 2023 WR250F. the first set saved my clutch lever when i laid my bike over on bedrock. the impact bent the handguards a bit, but not enough that i couldn't straight on the trail and continue riding. when i got home, instead of trying to restore the original curvature without the proper tools, and at this $28 price point, it was far less effort to just buy another set. i can't imagine spending 3 or 4 times this much on a more expensive set only to be in the same situation in the end.some installation notes... the metal bar adapters did not fit inside my bar ends at all, and the plugs themselves without something to fill the gap would not tighten fully. my solution was to use 1/2" x 5/8" clear tubing instead. this has the advantage of having a bit more grip inside the bars than metal on metal.as others have said, the plastic spacers that come with the inner mounting brackets are useless. instead, i used strips of 1" x 1/16" neoprene until the fit was tight.on the first set i took (far too much time) with a vise trying to bend the inside ends of the guards to match the angle of the inner mounting bracket. on the second set (shown) i simply tightened the main bolt more which induced a slight curve in the guard and closed the majority of the gap caused by the angles not being exact.finally, the color between the first and second set varied a little, with the second being a slightly darker shade of blue. the first set matched the headlight better, but the second set matches the fenders and side panels almost exactly. i guess even yamaha has had some difficulty getting the color just right.i would definitely recommend these handguards and will absolutely buy another set in the future if needed.

I don't like writing reviews that mean to slander the company but I thought as a returning consumer everyone should know my updated thoughts about this product. I purchased these hand guards once about a year and a couple months ago and they were solid, quality for the price and fit great on my CB300F. Fast forward to present day, the guards protected my bike from two falls and finally the left one bends and becomes unusable but PROTECTED my lights and my clutch levers beautifully. I purchased them again thinking they would match the quality they did previously but I was wrong. What was sent to me was one with much THINNER metal, the plastic was sloppily outlined and looked like it was misaligned. The weight drastically decreased making me dread that they could snap at the thought of a fall. Be careful buying these in terms of expectations. Sure they will protect your hands from debris and wind but coming from a RETURN CUSTOMER, I am sadly very disappointed that they choose to sacrifice quality to keep production cost low. It's a shame really.

Installed on a 2018 kawasaki KLX250. A little bending was necessary for a perfect fit. Looks great!

A had these exact handguards on 2 previous bikes....so I knew what I was getting. 3rd set, just as happy as the first 2 times. Thick aluminum, but soft enough to be able to tweak a bit to they line up nice. The other 2 bikes got dropped and flopped and the guards held up just you'd want them to and protected the levers. These are identical so they'll hold up the same.Great buy, 1/3 the price of a nearly identical name brand. If you smash them hard enough to actually break one...well, they didn't owe you anything anyway. The plastic is large and really cuts the cold wind on chilly days....and it's soft enough that it doesn't break when it hits the ground...every time they hit the ground they just got scratched. Can't beat that.

calidad precio fabulosa, toda suzuki DRZ400 S o e o SM debe tener estos.muy buen precio, pensé que sería malos pero me equivoqué

Muy buenos

I am returning these things. bought for xr 650l. The brake lever gets hung up on the screws holding the handguard to the aluminum frame so when you pull the lever it gets stuck. Same on the clutch lever. One bolt missing out of the package. the hand guard slots are to small to get the bolt through. not happy with these at all. Save your money and buy quality parts. NEVER making this mistake again!