Antec P101 Silent Performance Series Mid-Tower PC Computer Case with Sound Dampening Panels, 4 X 120/140mm Cooling Fans Pre-Installed

I ended up getting the P7Neo.I'd say the overall the layout is decent. I was able to install a full-ATX motherboard in it, and it ends up right at the edge of the optical bay bracket. I don't have an optical drive installed currently, but it looks like you can get one in there with an ATX board installed. There are enough cutouts to make cable management fairly easy, and you can end up with a nice tidy case with clean airflow if you just take a little time getting things routed behind the backplane. There's enough room behind the backplane that you can actually run the cables back there without having to cram the rear hatch shut when finished, which is nice. It's not what I'd call roomy, but I've had cases in the past where you have to really mash the rear hatch to get it seal up right.The 3 included case fans don't exactly push a ton of air, but they stay very quiet, and I suspect the sound dampening side panels also help. Honestly, with my build, I can barely hear it under any workload (my GPU has an oversized cooler on it). A bit of heat can build up around the CPU area, and with no top opening or fan mounts, you may want to put something higher volume on the back to get that warm air out.The thickness of the materials are definitely on the lean side. I've never owned a case so light before. Once it's buttoned up, it's sturdy enough, so it's really not a concern for me. The light weight can maybe be a good thing when it comes to moving it around, but I would want something more durable-feeling if I regularly transported it. I did heed the other reviewers about removing the expansion slot dividers. The breakaway design is obviously a cost-save move, but you do want to be careful so you don't mangle things. I recommend popping out the ones you need to remove before you mount the motherboard, as the back-n-forth wiggle to break them loose could potentially scratch the motherboard. My GPU is heavy and takes up 3 slots, but it only mounts to 2 expansion slots, and the end result is sturdy enough, IMO.If I had one wish, it would be to have more than just 2 USB-A slots on the top front. If you keep your case on the floor under a desk, those rear ports can be hard to get to, so I'd prefer 3 or more, but oh well. In the end, it's a worthwhile case, and I'd buy it again. It does the job without all the windows and RGB madness. My CPU (130W) isn't one of these modern-day space heaters, so I'd be a little hesitant to use this with any of your hotter running CPUs or with motherboards that produce a lot of VRM heat. It's fine for a midrange build, though.

When it comes to building a PC, choosing the right case is crucial for both aesthetics and functionality. Enter the Antec Performance Series P7 Neo Mid-Tower E-ATX Silent Case - a sleek and feature-rich chassis that strikes the perfect balance between style, silence, and performance. Here's why the P7 Neo deserves a spot in your next build.Let's start with design. The P7 Neo boasts a minimalist yet elegant aesthetic, with clean lines and a sleek profile that looks right at home in any setup. The tempered glass side panel showcases your components in all their glory, while the understated front panel design adds a touch of sophistication to your build.But the P7 Neo isn't just a pretty face; it's also designed with performance in mind. The spacious interior accommodates E-ATX motherboards and high-end graphics cards, giving you plenty of room to build the system of your dreams. Plus, with support for up to three 120mm fans, including two pre-installed in the front, airflow is optimized for maximum cooling performance.One of the standout features of the P7 Neo is its emphasis on silence. Thanks to sound-dampening materials and a thoughtfully designed airflow system, this case keeps noise levels to a minimum even under heavy load. Whether you're gaming late into the night or working on intensive projects, you can enjoy a quiet and distraction-free environment without compromising on performance.Another highlight of the P7 Neo is its versatility. With support for up to five 3.5" HDDs or six 2.5" SSDs, as well as a 5.25" ODD bay, storage options are plentiful. Cable management is a breeze thanks to the ample space behind the motherboard tray and strategically placed cable routing holes, ensuring a clean and clutter-free interior.Installation is a breeze thanks to the tool-less design and thoughtful layout. Whether you're a seasoned builder or a first-time PC enthusiast, you'll appreciate the ease of installation and the attention to detail that Antec has put into every aspect of the P7 Neo.In conclusion, the Antec Performance Series P7 Neo Mid-Tower E-ATX Silent Case is a standout choice for anyone looking to build a high-performance PC without sacrificing style or silence. With its sleek design, excellent airflow, and emphasis on noise reduction, this case ticks all the boxes for discerning builders. Upgrade your build with the P7 Neo and experience the perfect blend of form and function.