55L Motorcycle Top Case, Aluminum Alloy Universal Motorcycle Trunk, Dual-key Storage Carrier Case Luggage (Black, 55L)

Use this for carrying a pretty heavy rolling laptop bag to RN school. Bag is packed full of junk and books and laptop and more junk. This case holds it without any flex or wobble. Holds my helmet with tons and tons of room to spare. The lid seems like its pretty well sealed, I havent rode in rain yet but I am not worried about it. The whole thing is pretty well done and seems a bit better made than the 2 stock cases that came with my bike for 4x the price. Would totally recommend this. Been commuting to school 5 days a week for a few weeks now and no issues.uh. One of the corners did make a tad bit of rattle where it mounts to the quick release plate but I just put a piece of cut bike tube under there and the rubber worked perfect to stop the rattle. Nothing serious that I would have worried about it coming off the quick release plate though was just the thinnest gap.TBH it looks kinda dumb cause its so big but its 1000% functional and I am so glad I took a chance and ordered it.No regrets.

Box works great and keeps items secure and dry. Been on a few trips and have dropped the bike a time or two and the bow has no damage and gear inside was protected. Box kept the gear dry in a down pour. Had to customize the mount to my KLR 650 by adding holes but was easy with a metal drill bit.

First off, my tail box came in slightly damaged. But I really needed it for the next day and didn't want to send it back. There's no way to push out the dent as the plastic is very tough. I may try heating it up a bit. I was quite disappointed to see it really because it looks kinda bad. Maybe reach out and give me a little money back for quality control or something. Or I still have the original box, I can return for replacement.Plate was super easy to mount. Box fit into it well and seems to be quite secure when locked.I kind of wish I had gotten the bigger box now.It's very roomy. But it does fill up quick with my gear when i get to work and take off the boots and pants and keep my backpack in there with my lunch.All in all happy though.

Fast shipping with the box intact. One corner (plastic) was scuffed is the reason for not being 5 stars. I didn’t want to go through the hassle of returning and waiting for a replacement. The liner is a very nice touch and it holds my adventure helmet with no problem. 55L is what I purchased. The locking mechanism is not as sturdy as a Givi but is not the price of a Givi. All in all a good value.

It's large, as expected, 65L. The mounting system, of course makes trade offs for being universal, but I had it mounted on my KLR650 in about 15 minutes using it's standard rack and the included hardware. It would be rather simple to anchor the base more securely if your motorcycle has screw points facing upwards. The case includes poly-lock nuts, which should keep it secure, and 2 different lengths of screw. The nuts on mine were standard 10mm. As I mounted it on a single piston paint mixer in disguise i naturally applied thread locking compound as well. The base plate is a bit heavy, and it's somewhat finicky to align the pegs on the case with the mounting plate itself, tending to sink too deep. The base plate locking latch is also not perfectly aligned but it's easy enough to give it a gentle squeeze into position enough to latch. I might mount a plastic guide to assist with vertical alignment. From the factory, you will NOT be mounting this topbox loaded without using a lot of bad words. It's just not going to align without excessive effort.I just took it for my shopping. it comfortably holds 4 or 5 standard poly shopping bags loaded full, flat, with room to spare vertically. Or in my case, a dozen drinks and 3 shopping bags, with a few emergency tools. The effect on the bikes center of gravity is much in line with any case of similar size and weight, as physics are not changing no matter the brand.These are clearly... 'inspired heavily' by the givi outback series. They are nowhere near the quality of Givi, but at half price, it's a box that sure is box shaped and holds things...

I love the case and is very beautiful and well made. Just one minor thing, the bottom cylinder lock jammed lock and wish I could contact the seller to buy a replacement cylinder or the lock system.

For starters the box isn’t made from aluminum. The main body is plastic, but a pretty decent plastic. The hinges are plastic. The latches are steel. The only aluminum on the thing is the mounting plate on the bottom of the box, and the rivets that hold the plastic panels together.The latch that holds the box to the mount is faulty and does not lock due to the nipple being bent over. I fixed that by bending the locking tab over and now it locks, but not in the way it is intended to.Overall it is a decent box for the price. It’s just not as good as I was hoping, and it isn’t made out of aluminum.

Wow this is really nice. Room for a helmet and more! Mounted easily to my CT125. Solid and stable. Locks work great too.

My wife bought this as a top box for my Africa Twin and I love it. Great quality for the price. Easy install on almost any bike I think. Hardware seems solid.

Solo tuve que poner unos tornillos más largos para fijar la base de la caja.Es muy útil,caben 2 cascos muy bien.

Fitted to R1200GS, needed to mount an additional bottom plate to match existing mounting points (10 minute job). Very surprised at how good the product is seeing that it’s a third of the price of an original top box. Just have to wait and see how long it lasts.

I ride my DR650 on rough roads and when mounted this carrier on it, I was impressed, as it handled the constant pounding like a champ. I like the sturdy metal mounting bracket as the plastic carrier mount I used before broke. Lots of $$ but works well.

Less that a third the price of others - quality material - easily fitted to my KLR650. Happy with purchase