---
product_id: 140891821
title: "Environmental Technology 8-Ounce Kit Casting' Craft Casting Epoxy, Clear (Тhrее Расk)"
brand: "environmental technology"
price: "FREE"
currency: KES
in_stock: false
reviews_count: 8
category: "Arts Crafts"
url: https://www.desertcart.co.ke/products/140891821-environmental-technology-8-ounce-kit-casting-craft-casting-epoxy-clear
store_origin: KE
region: Kenya
---

# Environmental Technology 8-Ounce Kit Casting' Craft Casting Epoxy, Clear (Тhrее Расk)

**Brand:** environmental technology
**Price:** FREE
**Availability:** ❌ Out of Stock

## Quick Answers

- **What is this?** Environmental Technology 8-Ounce Kit Casting' Craft Casting Epoxy, Clear (Тhrее Расk) by environmental technology
- **How much does it cost?** FREE with free shipping
- **Is it available?** Currently out of stock
- **Where can I buy it?** [www.desertcart.co.ke](https://www.desertcart.co.ke/products/140891821-environmental-technology-8-ounce-kit-casting-craft-casting-epoxy-clear)

## Best For

- environmental technology enthusiasts

## Why This Product

- Trusted environmental technology brand quality
- Free international shipping included
- Worldwide delivery with tracking
- 15-day hassle-free returns

## Description

Full description not available

## Features

- Ideal for polypropylene or rubber molds
- Is low odor
- Solvent-free
- One-to-one ratio

## Images

![Environmental Technology 8-Ounce Kit Casting' Craft Casting Epoxy, Clear (Тhrее Расk) - Image 1](https://images-na.ssl-images-amazon.com/images/I/415N4tlt4xL.jpg)

## Customer Reviews

### ⭐ Please don’t buy this!
            
*by A***Y on April 23, 2018*

Let me just start with I use resin almost everyday. I’ve sold over 4,000 pieces of resin jewelry so I’m pretty familiar with the process and this resin is THE WORST! In just a few days I’ve gone through almost the entire contents because each batch turns out awful. I’m extremely careful in measurements and mixing and allowing the process to begin before I pour and let me tell u buying this resin set me back so far in my work. It’s been a sticky nightmare and I will never buy it again. I’m going back to ICE resin which has been awesome for me.
  

### ⭐⭐⭐⭐⭐ So easy to use. Directions very clear. Beautiful outcome
            
*by N***E on September 1, 2016*

This was my first time using resin. I was torn between this brand and the ice. I reviewed both products and watched yout be videos of people using both. I finally came to the decision to go with this one. Mainly because it was cheaper, and I wasn't sure if I was even going to like making resin jewelry. I am happy to report I am very pleased with my decision. I followed the instructions as listed. Mix exactly even ratios of both. You will get bubbles, but youtube taught me to use heat to get them out. If you let the cast set for 10min most of the bubbles will disappear on their own. But I was left with a few more small bubbles, so I used a lighter and swiped over my cast quickly to pop the bubbles. It works like a charm. And if you have a small cast (like marble size) you can use the heat from your breath to do this. Although I wouldn't recommend that. I did this first before later buying one of those long lighters you use to lite grills with. I will be purchasing this item again!
  

### ⭐⭐⭐⭐ Good resin for the job at hand
            
*by A***N on September 12, 2015*

My use was not typical as I wanted a void filling resin for an Eastern Red Cedar bench I was making.  The problem was a void in the wood that I did not want to putty in or otherwise cover over, but wanted to filled so that its natural internal contours could be retained, even though it would be on the underside of the bench.  I cleaned out the void so that there was no dust or other material to fall out, and had to use tape to support an extended fragment from the main piece that went over the void space.  For this I would use cheap, plastic shot glasses to mix the resin as they can be easily disposed of.The process was a multicast procedure which took a few batches so that the exothermic reaction wouldn't cause natural wood oils to come out of the wood. The first pour was just a base one to get into the hidden void spaces and make sure that nothing came out to the other side, which is always a worry with a wood like this.  I kept the piece covered so nothing would get on the surface and then the second day poured another batch in, following the first day's procedure.  A total of 4 pours were needed to get the resin to near the tape supported piece and the tape was removed for the final pour to allow the wood to rest naturally against the prior day's pour.  Pour 5 started the final covering procedure and came around that wood piece to support it up to its sides.  I was willing to let the hardened resin be a bit concave which happened as part of the normal shrinkage in casting.  With good adherence to the sides and internal void spaces that was the only way it could shrink.Now the bench has that as an extra feature which took some time, but seemed like a much better idea than just filling it in flat with putty or colored epoxy.PROs- Easy to work with- Fills in void spaces- Relatively fast set-up for multi-pour situationsCONs- Exothermic, which means thinking ahead on the amount to cast at a given time- Shrinks as it cools- Time consuming for larger piecesFor me this was a great solution as an alternative that my normal methods wouldn't address.
  

---

## Why Shop on Desertcart?

- 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016
- 🌍 **Shop Globally** — Access 737+ million products across 21 categories
- 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price
- 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members)
- 🔒 **Secure Payments** — Trusted payment options with buyer protection
- ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews

**Shop now:** [https://www.desertcart.co.ke/products/140891821-environmental-technology-8-ounce-kit-casting-craft-casting-epoxy-clear](https://www.desertcart.co.ke/products/140891821-environmental-technology-8-ounce-kit-casting-craft-casting-epoxy-clear)

---

*Product available on Desertcart Kenya*
*Store origin: KE*
*Last updated: 2026-03-18*